Every now and then I make a batch of resin pendants using various methods, and I’m sharing with you today how I’ve made these hand painted resin pendants.
You will need:
-Resin
There are so many brands of resin to use. I’ve been using one called “Glass Coat”. They are sold as a two part epoxy kit that you mix together. The individual brands will state on the bottles whether they are suitable for coating.
-Wide wooden stirrer
-Wooden craft disks (I used 1 1/2”)
-Bails
-Gesso
-Acrylic Paint
-Sealer (I used a water based gloss varnish)
-Necklace or cord and closure of your choice
-Small propane torch
-E6000 glue
First, seal your wooden disks using gesso.
First, seal your wooden disks using gesso.
Once dry, paint them however you like. Glean some inspiration from Alisa Burke’s flowery painting projects here, or just doodle-paint like I did. I had no plan; I just started painting. If you don’t like anything you’ve done, just paint over it! There’s no pressure here, and that’s the beauty of acrylics :)
Paint the backs of the pendants in solid colour.
Once my designs were dry, I sealed them using the gloss sealer front, back and sides.
Leave to dry.
Now you can mix your resin. Pour the two parts of your resin into a disposable cup, and mix following the directions on the bottle of your particular brand using the wooden stirrer.
Place your pendants on some paper (baking paper provides extra protection if you need it) to protect your working surface. Pour the resin on, or ‘spoon’ on like I have in the photo, and gently coax the resin up to the sides of the disk using the stirrer. The surface tension keeps the resin from dripping over the sides, although that sometimes happens.
Using the propane torch, quickly run over the resin close to the surface, but not touching the resin with the flame. This will pop any little air bubbles.
Leave in a dust free area to cure. I place a large lid over my work to keep dust off. You just have to make sure the lip is deep enough so it doesn’t touch the pendants.
Glue bails on the pendants using E6000 glue.
Once the glue is dry, thread your pendants onto cord or necklace, and enjoy!
Jules :)
You can find more of Jules here:
Instagram https://www.instagram.com/julesmadden/
Well, there was 3 hours of fun. Thank you, Alisa! Color makes me sing!
ReplyDeleteWhat a great idea! It actually gives me another idea that I'm definitely going to try! Thanks for your inspiration!
ReplyDeletethanks for this unique post .
ReplyDelete